How to Make a Battery Case for Vape Batteries

As a vape user, it is important to ensure the safety and protection of your vape batteries. One way to do this is by creating a battery case that will help you store and transport your batteries safely. 

In this article, we will guide you on how to make a battery case for vape batteries.

Materials Needed

Before we start with the steps, let us first prepare the materials needed:

• ABS Plastic Sheet
• Measuring Tape
• Marker
• Utility Knife
• Sandpaper

Steps

Here are the step-by-step instructions on how to make a battery case for vape batteries:

Step 1: Measure the Batteries

The first step is to measure the batteries that you will be using. Make sure to take note of the length, width, and height of the batteries.

Step 2: Measure and Mark the Plastic Sheet

Next, use a measuring tape to measure and mark the plastic sheet according to the measurements of the batteries. Make sure to add an allowance of at least 1 cm to ensure that the batteries will fit inside the case.

Step 3: Cut the Plastic Sheet

Using a utility knife, carefully cut the plastic sheet along the marked lines. Make sure to cut through the sheet completely.

Step 4: Sand the Edges

After cutting the plastic sheet, sand the edges using sandpaper to remove any rough edges or sharp points. This will help prevent the batteries from getting scratched or damaged when inserting or removing them from the case.

Step 5: Bend the Plastic Sheet

To create the actual case, bend the plastic sheet carefully using your hands. Make sure to bend it in a way that it will fit the batteries snugly. You can use a marker to draw a line where the sheet needs to be bent.

Step 6: Secure the Edges

To secure the edges of the case, you can use a heat gun to melt the plastic slightly. This will make the edges smoother and prevent the case from opening accidentally. Make sure to be careful when using a heat gun to avoid melting the plastic too much.

Step 7: Test the Case

Once the edges are secured, test the case by inserting the batteries. Make sure that they fit snugly inside the case and that there is no space for them to move around. This will help prevent the batteries from getting damaged or short-circuited.

Step 8: Label the Case

Lastly, label the case with the type of batteries that it contains. This will help you keep track of which batteries are inside the case and prevent any confusion.

Conclusion

Creating a battery case for your vape batteries is an easy and cost-effective way to ensure their safety and protection. 

By following the simple steps provided in this article, you can make your own battery case and enjoy vaping without worrying about the safety of your batteries.

FAQs about making vape battery cases

How do I know if my battery case is the right size for my batteries?

Make sure to measure your batteries accurately and add an allowance of at least 1 cm to ensure that they fit inside the case.

Can I use other materials aside from ABS plastic sheet?

Yes, you can use other materials such as PVC sheet or acrylic sheet.

Is it safe to use a heat gun to secure the edges of the case?

Yes, it is safe as long as you are careful and avoid melting the plastic too much.

How many batteries can I store in a single case?

It depends on the size of the case and the size of the batteries. Make sure that there is no space for the batteries to move around inside the case.